Dedyel Home Button Replacement For IPad 9 9th Generation 10.2 Inch 2021 (A2602 A2603 A2604 A2605), IPad 811 Inch 2020 (A2270 A2428 A2429 A2430), IPad 7 10.2 Inch 25.9 25.9 Cm 019 (A) 2197 A2198 A2200)

Home Button Replacement Compatible with iPad 9/ ipad 8/iPad 7 Compatible models: iPad 7 7th Gen 10.2 2019 (A2197 A2198 A2200) iPad 8 8th Gen 10.2 2020 (A2270, A2428, A2429, A2430) iPad 9 9th Gen 2021 10.2 A2602 A2603 A2604 A2605 Package Contents: 1 * Home Button Incl Flex Cable Connector 1 * Horn bracket 1 * Gasket 1 * Waterproof ring Home button installation step description: The first step Take out the parts as shown in the picture, separate them with your fingers, and keep the parts marked by the arrows in the picture. The Second step Tear off the circle gasket reserved in the previous step, and stick the sticky side to the button hole on the back of the touch screen. The third step Take out the buttons in the tool kit, as shown in the figure. The fourth step Put the back of the button up, and then put it into the button hole, as shown in the figure. Home button installation step description: The fifth step Take out the parts (waterproof ring) as shown in the figure, and tear off the protective film. The eighth step Paste the sticky side of the part on the key hole of the touch screen, and the center of the part is aligned with the center of the key hole, and the key change is installed. At this point, you can test and press the button to see if the button can be pressed normally. If there is no response when pressing, please check whether the installation of all parts is fully calibrated. Kindly Note: By replacing the home button assembly, you will permanently lose the Fingerprint Touch ID function. For security reason, only the original home button touch sensor will work for your ipad. For any questions about products or services, please communicate with us via Amazon email, we will give you a satisfactory answer within 24 hours ❤️[Compatibility]: The home button is only compatible with iPad 9 9th Gen 10.2 2021 A2602 A2603 A2604 A2605, iPad 8 2020 (A2270 A2428 A2429 A2430), iPad 7 10.2 2019 (A2197 A2198 A2200). Please check the model number before purchasing this product. You will find the model number on the back of the device. (Please refer to the product picture on the left). ❤️[High Quality]: New home button replacement parts, each part has been tested before shipment. ✍[Application]: Replacing the home button component will permanently lose the fingerprint touch ID function. For security reasons, only the original home button touch sensor is available on your iPad. ❤️[After-sales service]: 3 months of non-human damage, we provide free replacement compensation. If you have any questions about installation tutorials, packages or products, please feel free to contact us via Amazon .